Performance Standard: 

• Denison Hydraulics HF-0. HF-1, HF-2 (ISO 32, 46 & 68)
• Eaton Vickers M-2952-S, I-286-S (Industrial applications), M-2950-S [mobile applications] (ISO 32, 46, 68)
• Cincinnati Milacron P-68 (ISO 32), P-69 (ISO 68), P-70 (ISO 46) • ISO 11158 (HM fluids)
• ASTM 6158-05 (HM fluids)
• DIN 51524

Benefits

Longer Equipment Life
Special anti-wear additive property reduces wear by protecting surfaces when excessive load causes break down of the lubrication film.

Reduce Maintenance Cost

Effective rust and oxidation inhibitor prevents the production of abrasive particles from rust formation and deposits, that can damage equipment surfaces and seals, and block filters prematurely.

Fluid Compatibility
Good hydrolytic stability and water separation characteristics provide excellent filterability in the presence of water contamination. Good anti-foam and air release properties ensure smooth operation and system efficiency.

Additional benefits associated with ORA range are as below:

• Superior Filterability
• Low Friction
• Hydrolytic Stability

Application

• Industrial hydraulic systems.
• Hydraulics of moving/stationary and construction equipment.
• Hydraulic systems with vane, gear or piston pumps.
• Plastic injection molding machine.
• Marine hydraulic systems.

Key Properties

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

Performance Standard: 

• ANSI/AGMA9005-D94 [EP] (Grades 68 to 320)
• U.S. Steel 224 (Grade 68 to 320)
• David Brown, Table E, approved (Grade 68 to 460)
• DIN 51517 Part 3 (Grade 68 to 460)

Benefits

Cnergyico Oger EP Gear Oils helps to improve system efficiency by:

• Protecting against impact of oil ageing and contamination for efficient lubricants.
• High thermal stability and extreme load pressure.
• Helps maintain clean gear and bearing surface, minimizing deposits that interfere with effective lubrication.
• Reduces energy loss and improves oil drain intervals.
• Protecting gears from wear and corrosion is important to prolong asset life and prevent breakdowns.
• Oger range of industrial oils offer protection on a wide range of applications that includes extreme pressure rolling contacts in spur
  gears to sliding contact in worm gears.
• Good water separation and effective rust inhibitors protect surfaces against rust and corrosion.
• High thermal stability additives reduces the formation of pitting and corrosion to ball bearing.

Long Oil Life

• Longer oil life helps reduce fluids maintenance of your equipments to ensure operation without interruption.
• Oger EP range of lubricants enable you to match oil life to your operational needs.

Application

• Enclosed industrial spur & bevel gear applications from standard to high load and extended duty applications.
• Used in spur, bevel, helical, worm and industrial hypoid gear cases where extra shock-load protection is needed or particulate contamination occurs.
• Suitable for use in reduction gear boxes in mining equipment, cement mills, ball and rolling mills, crushers, conveyors, kilns, winches, machine tools and marine equipment.
• Chain drives, sprockets and flexible couplings.

Key Properties

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

Performance Standard: 

• ANSI/AGMA 9005-D9

Benefits

Cnergyico Oger EP Gear Oils helps to improve system efficiency by:

• Excellent Wear Protection Under Adverse Conditions:
  The high load carrying capacity and adhesive properties of the residual base oil ensures that a tough, durable lubricating film is maintained on exposed gears and surface.
• Good Rust Protection:
  The tenacious lubricant coating protects exposed metal surfaces against the elements. The special compounding components provide
  additional rust protection by resisting water washout.
• Quiet Operation of Gears:
  The highly cohesive lubricant coating remains pliable and effectively cushions gears and contacting surfaces.

Application

• Open gears in sugar mills, mining, quarrying and construction equipment.
• Chains and sprockets.
• Wire rope.
• Flexible couplings.
• Sliding surface (e.g. drag lines and shovels).
• Enclosed gears and traction motor gear cases (where leakage is excessive with conventional lubricants).

Key Properties

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

Performance Standard: 

• High heat transfer co-efficients
• High thermal & oxidation stability
• Good viscosity & temperature characteristic
• Low vapor pressure & toxicity
• Non-corrosive

Oil Life

Life of Cnergyico OTX depends on design and usage of system. If system is well designed and not subjected to abnormal work loads/shutdown the life of the oil can be enjoyed for long period. However, oil condition monitoring at regular interval is important to measure the change in physical characteristics of the oil.

Benefits

Thermal Stability:

• Mineral oil are subject to degradation at high temperature.
• Cracking of hydrocarbon molecules by heat some of that appears as volatile gases and polymerize into non-soluble deposits.
• Oxidation of hydrocarbon oil with atmospheric oxygen that increases rapidly with increasing temperature.
• Oxidation produces acidity in oil with some non-soluble contaminants that result in increase in viscosity.

Cnergyico OTX is developed to display exceptionally good thermal stability at temperatures upto 320°C depending on the ISO VG Grades. The low rate of cracking and oxidation gives maximum oil life assuming efficient fluid heater with good pump circulation.

Equipment Design and Operating Advice:

The potential source of damage to Cnergyico OTX is the heater. To avoid damage, circulation pump should be capable of producing high turbulent oil flow through the heater. Heat flux should be kept to a minimum to reduce film temperature.

Application

Mineral Oil for all closed fluid heat transfer systems.

Key Properties

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

Performance Standard: 

• Cincinnati lamb P-45 (ISO VG-22)
• Cincinnati lamb P-62 (ISO VG-5, 10)

Compatibility

• Paint compatibility.
• Cnergyico Cispin Oils are compatible with seal materials and paints normally specified for use with mineral oils.

Benefits

• Non-corrosiveness to metals.
• Excellent anti-wear protection.
• Excellent water separation properties.
• Superior protection from rust and oxidation.
• Excellent oxidation stability.
• Cnergyico Cispin Oils are designed to meet specification requiring low viscosity oil with high-quality base oil, for application running at high speed such as those found in speed frames and automated machine tools.

Application

• In textile industries where machine oil does not have contact with the fabric or where oil staining is not an issue.
• Lubrication of high speed spindle and machine spindle bearings.

Key Properties

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

Performance Standard: 

• API service classification GL-4

Benefits

• Long Life Low Maintenance
  Selected highly refined base oil and special inhibitor system provide good oxidation stability to resist oil degradation and shrinking of oil.
• Low Maintenance Cost
  Special mild-EP additive and corrosion inhibitor system is non-corrosive toward sensitive copper alloy components and protect ferrous metal against rusting in presence of moisture. Good thermal stability keeps gear cases and bearing clean and free from harmful deposits.

Note: The typical characteristicsNot suitable for heavy duty hypoid axles.

Application

• All industrial application, automotive, agricultural gear sets, lubrication of track rollers of crawler tractor for which API GL-4 oil acceptable/performance level required.
• It provides excellent lubrication of manual gearboxes of motorcycle, passenger cars and commercial vehicles operation under high-speed low torque and low-speed high torque condition.
• Suitable for rear axles application presenting condition of medium severity, such as light-duty commercial vehicle passenger cars and motorcycle.

Key Properties

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

Performance Standard: 

• API service classification GL-5

Benefits

• Prolong Oil & Equipment Life
  Specially selected additives provide good anti-wear, anti-rust and special inhibitor system provide good oxidation stability to resist oil degradation and thinking of oil under severe operating conditions. High performance sulfur-phosphorus EP additive system provides excellent load carrying capacity to protect gear equipment. Resistance to corrosion alloys and ferrous metals.
• Low Maintenance Cost
  Special dispersant and additive package suspends sludge and carbonaceous deposits in the gear oil, preventing their deposit on gear components and oil seals, thus avoiding the premature oil change overhaul service cost. Excellent thermal stability minimizes the total amount of harmful deposits.

Application

• All industrial application, automotive hypoid gear differentials operating under high-speed/shock load, high-speed low torque and low-speed high torque conditions where API GL-5 is recommended.
• It provides excellent lubrication heavy duty non-synchronized manual transmission where API GL-5 performance required.
• Suitable for hypoid gear axles, motorcycle gear units separated from the engine.
• Automotive transmission, differential.
• Moderate to heavily loaded gear sets in stationary and moving equipment.

Key Properties

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

Recommended Dosage

The concentration of Socol metal working fluid varies on the type of machining operations required, water hardness and the level of protection required against rust protection. Socol is usually used in an oil-to-water ratio of 1:10 to 1:60 or as per the application required. In general, a richer emulsion is used for the more difficult jobs, the intermediate for the free-machining metals and the lean mixtures are used for operations where massive cooling is required, like in grinding.

Benefits

• Emulsion stability – Readily emulsifies to form a stable emulsion in wide range of water hardness.
• Corrosion protection – This is guaranteed both for machine tool and metal piece.
• High Lubricity – High mineral oil content of emulsion provides excellent tool lubrication and finish to machining piece.
• Non-ferrous – Suitable for use with non-ferrous metals.

Features

• High quality oil
• Reduces heat
• Improves tool life
• Gives a better surface finish
• Stable and long lasting emulsion
• Stable in use and in storage

Storage Instruction

To be stored in temperatures 5°C to 40°C for not over 10 to 12 months & to be protected from freezing.

Application

• Cnergyico Socol is a water soluble oil with highly refined mineral oil contents suitable for wide range of machining activities on low to medium alloy steels, aluminum, copper and copper alloys and brass. Ideally suited for machine workshops that work with mixed metal grades.
• Suitable for engineering workshops with high machining activities on different grades of metals.

Key Properties

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

Performance Standard

• Very good oil oxidation resistance
  Resists formation of carbon deposits in sliding vane slots, enabling them to move freely. Also resists deposit formation on rotating components of screw compressors. As a consequence, high levels of compressor efficiency can be maintained for long period in both types of compressors.
• Very good air release and anti-foam properties
  The careful selection of base oils and additives provide rapid air release without excessive foaming to give trouble-free operation even under cycling conditions.
• Very good rusting and wear protection
  Effectively protects all metal surfaces from corrosion. Protects all sensitive machinery parts, e.g. gears, screws, bearings from wear and prolongs the service intervals.
• Internal cleanliness
  Coupled with the oil’s long life capability is its ability to maintain internal surface cleanliness in service. This is important to maintain high levels of performance for the compressors and separator/coalesce.
• Improved water shedding properties
  Maintain performance when contaminated with water.

Benefits

• Good seal compatibility
  For increased seal longevity and reduced leakages.
• Low temperature performance
  For easy start-up at low temperature.
• Yellow metal passivation
  Corrosion protection and longer component life.
• Hydrolytic stability
  Prolongs oil life in moist condition.

Application

• Rotary sliding vane air compressors
  Oil flooded or oil injected, single or two-stage compressors, operating at pressure of up to 10 bar and with air discharge temperatures of up to 100°C.
• Screw air compressors
  Oil flooded or oil injected, single or two-stage compressors, operating at pressures of up to 20 bar and with air discharge temperatures of up to 100°C.

Key Properties

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

Performance Standard

• Prolonged service intervals
  Allows the interval between valve and piston maintenance to be extended. Compressors can be kept in service for much longer periods, operating at a consistently high level of efficiency.
• Safe airlines
  In discharge airlines, the combination of rust particles dispersed in carbonaceous deposits, coupled with heat from recently compressed air, can cause an exothermic reaction leading to the possibility of fires and explosion. Cnergyico Compress-P helps to minimize the likelihood of this danger arising.
• Very good oxidation resistance
  Resistance to the formation of carbon deposits and lacquer on valves and piston crowns, caused by the by-products of corrosion, such as ferric oxides and hydroxides, at high working temperature and pressures. Such deposits can cause serious damage, lower compress efficiency and increase maintenance costs.
• Very good rusting and wear protection
  Effectively protects all metal surfaces from corrosion. Protects all sensitive machinery parts, e.g. housing, valves, bearings, from wear and prolongs the service intervals.
• Very good air release and anti-foam properties
  The careful choice of additives ensures rapid air release without excessive foaming.
• Very good water separation properties
  Cnergyico Compress-P separates readily from water allowing excess water to be drained from the oil circulation system, thus preventing accelerated corrosion and a reduction in lubrication efficiency. This also helps separators and drier units.

Benefits

• ISO 6743-3A-DAH
• Good seal compatibility
  Cnergyico Compress-P is compatible with all sealing materials commonly used in air compressors.
• Low temperature performance
  For easy start-up at low temperature.
• Yellow metal passivation
  Corrosion protection and longer component life.
• Hydrolytic stability
  Prolongs oil life in moist condition.

Application

• Reciprocating Air Compressors
  Industrial reciprocating air compressors operating with air discharge temperatures of up to 220°C.
• Breathing Air Compressors
  Cnergyico Compress-P may be used in breathing air compressors, provided subsidiary clean-up apparatus is used to ensure that the air produced is fit for breathing.

Key Properties

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

Lithium-based Industrial MP Grease

Benefits

• Very good mechanical stability
• High dropping point
• Good water wash-out characteristics
• Good rust protection
• Provide protection even at high operating temperature

Operating Temperature Range

• Cnergyico MPG is recommended for use over the temperature range -10°C to +110°C.

Application

• Cnergyico MPG is recommended for general purpose lubrication of plain and rolling bearings operating at moderate load in industry and at other greasing requirements.
• It can be used in all points requiring grease in passenger cars, truck, buses, trailers and Agri-tractors. These include wheel bearings, ball joints, all chassis points, universal joints, linkages, dynamo, starter motor’s bearing and steering gear and water pumps.
• It also can be used in bearings of power tools, lawn movers and other household equipments.

Key Properties

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

Benefits

• Very good mechanical stability
• High dropping point
• Good water wash-out characteristics
• Good rust protection & corrosion protection
• Provide protection even at high operating temperature

Operating Temperature Range

• Cnergyico EPG is recommended for use over the temperature range -10°C to +110°C.

Application

• Cnergyico EPG is recommended for lubrication of both plain and rolling element bearings operating at high temperature and moderate or high load conditions.
• Cnergyico EPG can be used in most industrial and automotive applications where loaded baring and joints exit.

Key Properties

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.